JIANGSU TIANCHENG GROUP LIMITED
Yaoguan Town, Changzhou City, Jiangsu Province,China
+86-519-88387662
+86-519-85121683
steel_tube
steeltube.china
Tiancheng_Group
josen_dong
info@tiancheng.org
CS 1010 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength.
| SAE 1006 | ||||
| Chemical composition: C=0.08% max, Mn=0.35% max, P=0.04% max, S=0.05% max | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.872 *10³ | kg/m³ | 491.4 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 200 | GPa | 29000 | ksi |
| Thermal expansion (20 ºC) | 12.6*10-6 | ºCˉ¹ | 7.00*10-6 | in/(in* ºF) |
| Specific heat capacity | 481 | J/(kg*K) | 0.115 | BTU/(lb*ºF) |
| Thermal conductivity | 64.9 | W/(m*K) | 450 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 1.40*10-7 | Ohm*m | 1.40*10-5 | Ohm*cm |
| Tensile strength (hot rolled) | 295 | MPa | 42800 | psi |
| Yield strength (hot rolled) | 165 | MPa | 23900 | psi |
| Elongation (hot rolled) | 30 | % | 30 | % |
| Hardness (hot rolled) | 49 | RB | 49 | RB |
| Tensile strength (cold drawn) | 330 | MPa | 47900 | psi |
| Yield strength (cold drawn) | 285 | MPa | 41300 | psi |
| Elongation (cold drawn) | 20 | % | 20 | % |
| Hardness (cold drawn) | 55 | RB | 55 | RB |
| SAE 1010 | ||||
| Chemical composition: C=0.10%, Mn=0.45%, P=0.04% max, S=0.05% max | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.872 *10³ | kg/m³ | 491.4 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 200 | GPa | 29000 | ksi |
| Thermal expansion (20 ºC) | 12.6*10-6 | ºCˉ¹ | 7.00*10-6 | in/(in* ºF) |
| Specific heat capacity | 448 | J/(kg*K) | 0.107 | BTU/(lb*ºF) |
| Thermal conductivity | 51.9 | W/(m*K) | 360 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 1.43*10-7 | Ohm*m | 1.43*10-5 | Ohm*cm |
| Tensile strength (hot rolled) | 325 | MPa | 47100 | psi |
| Yield strength (hot rolled) | 180 | MPa | 26100 | psi |
| Elongation (hot rolled) | 28 | % | 28 | % |
| Hardness (hot rolled) | 55 | RB | 55 | RB |
| Tensile strength (cold drawn) | 365 | MPa | 52900 | psi |
| Yield strength (cold drawn) | 305 | MPa | 44200 | psi |
| Elongation (cold drawn) | 20 | % | 20 | % |
| Hardness (cold drawn) | 60 | RB | 60 | RB |
The low carbon steels, such as 1010, are used for applications such as cold headed fasteners and bolts.
UNS# G10080 1008, M1008, SC1008 CARBON STEEL
UNS# G10100 1010, M1010, MT1010, SC1010 CARBON STEEL
UNS# G10110 1011 CARBON STEEL
AMS 5044H (1010) STEEL, SHEET & STRIP
AMS 5047D (1010) STEEL, SHEET & STRIP
AMS 5050J (1010) STEEL TUBING, SEAMLESS
AMS 5053G (1010) STEEL TUBINg, WELDED
AMS 7225G RIVETS-CARBON STEEL
AMS S7225 RIVETS-CARBON STEEL
ASTM -512 COLD-DRAWN BUTTWELD CARBON STEEL MECHANICAL TUBING
ASTM A-108 STANDARD QUALITY , COLD FINISHED , CARBON STEEL BARS ,
ASTM A-29 GENERAL REQUIREMENTS FOR CARBON & ALLOY BARS, WROUGHT & COLD-FINISHED
ASTM A-510 GENERAL REQUIREMENTS FOR WIRE RODS & COURSE ROUND WIRE, CARBON STEEL
ASTM A-513 ELECTRIC-RESISTANT-WELDED CARBON & ALLOY TUBING
ASTM A-519 SEAMLESS CARBON & ALLOY MECHANICAL TUBING
ASTM A-545 SPECIFICATION FOR STEEL WIRE, CARBON, COLD HEADING QUALITY FOR MACHINE SCREWS
ASTM A-549 SPECIFICATION FOR STEEL WIRE, CARBON, COLD HEADING QUALITY FOR WOOD SCREWS
ASTM A-575 MERCHANT QUALITY, M-GRADES, CARBON STEEL BARS
ASTM A-576 HOT-WROUGHT, SPECIAL QUALITY CARBON STEEL BARS
ASTM A-635 SHEET & STRIP, HEAVY-THICKNESS COILS, HOT-ROLLED
ASTM A-711 STANDARD SPEC. FOR STEEL FORGING STOCK
ASTM A-787 ELECTRIC-RESISTANT-WELDED METALLIC-COATED CARBON STEEL MECHANICAL TUBING
ASTM A-830 CHEMICAL COMPOSITION REQUIREMENTS FOR STRUCTURAL QUALITY PLATES
MIL-S-11310E STEEL BARS, CARBON, HOT-ROLLED, FOR SHAPING INCLUDING COLD EXTRUSION
MIL-T-3520C TUBING STEEL (LOW-CARBON) MECHANICAL ROUND
MIL-W-6712C WIRE, METALLIZING
QQ-S-630A STEEL BAR, CARBON, HOT ROLLED (MERCHANT QUALITY)
QQ-S-631 STEEL BARS, CARBON, HOT-ROLLED (SPECIAL QUALITY)
QQ-S-633A STEEL BARS, CARBON, COLD-FINISHED & HOT ROLLED (GENERAL PURPOSE)
QQ-S-634 STEEL BAR, CARBON, COLD-FINISHED (STANDARD QUALITY)
QQ-S-00640 STEEL, CARBON, SHEET AND STRIP
QQ-S-698 STEEL, SHEET & STRIP, LOW CARBON
SAE J403 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE J412 GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS
SAE J1249 FORMER SAE STANDARD & FORMER SAE EX-STEELS
SAE J1397 ESTIMATED MECHANICAL PROPERTIES & MACHINABILITY OF STEEL BARS
Coil
Extrusion-shapes
Foil
Pipe
Rectangle Bar
Sheet
Square Tubes
Strip
Tubes
Wire