JIANGSU TIANCHENG GROUP LIMITED
Yaoguan Town, Changzhou City, Jiangsu Province,China
+86-519-88387662
+86-519-85121683
steel_tube
steeltube.china
Tiancheng_Group
josen_dong
info@tiancheng.org
1020 steel responds well to cold work and heat treating. Weldability is fair.
1020 is suitable for case hardened parts where core strength is not critical.
May also be know as LCS "low carbon steel" 1020 is no longer a stocked industry standard grade, may time A-36 and 1018 are substituted for 1020, both having low carbon contents.
| SAE 1020 | ||||
| Chemical composition: C=0.20%, Mn=0.45%, P=0.04% max, S=0.05% max | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.872 *10³ | kg/m³ | 491.4 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 200 | GPa | 29000 | ksi |
| Thermal expansion (20 ºC) | 11.9*10-6 | ºCˉ¹ | 6.61*10-6 | in/(in* ºF) |
| Specific heat capacity | 486 | J/(kg*K) | 0.116 | BTU/(lb*ºF) |
| Thermal conductivity | 51.9 | W/(m*K) | 360 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 1.59*10-7 | Ohm*m | 1.59*10-5 | Ohm*cm |
| Tensile strength (hot rolled) | 380 | MPa | 55100 | psi |
| Yield strength (hot rolled) | 165 | MPa | 29700 | psi |
| Elongation (hot rolled) | 25 | % | 25 | % |
| Hardness (hot rolled) | 66 | RB | 66 | RB |
| Tensile strength (cold drawn) | 420 | MPa | 60900 | psi |
| Yield strength (cold drawn) | 205 | MPa | 50800 | psi |
| Elongation (cold drawn) | 15 | % | 15 | % |
| Hardness (cold drawn) | 73 | RB | 73 | RB |
Shafts, lightly stressed gears, hard wearing surfaces, pins, chains and case hardened parts where core strength is not critical.
UNS# G10200 1020, M1020, CS1020, MT1020, CARBON STEEL C .018 - 0.23
AMS 5032F (1020) STEEL WIRE
AMS 5045G (1020) STEEL, SHEET & STRIP
AMS 5046A (1020) CARBON STEEL, SHEET, STRIP & PLATE
ASTM A-108 STANDARD QUALITY , COLD FINISHED , CARBON STEEL BARS
ASTM A-29 GENERAL REQUIREMENTS FOR CARBON & ALLOY BARS, WROUGHT & COLD-FINISHED
ASTM A-510 GENERAL REQUIREMENTS FOR WIRE RODS & COURSE ROUND WIRE, CARBON STEEL
ASTM A-512 COLD-DRAWN BUTTWELD CARBON STEEL MECHANICAL TUBING
ASTM A-513 ELECTRIC-RESISTANT-WELDED CARBON & ALLOY TUBING
ASTM A-519 SEAMLESS CARBON & ALLOY MECHANICAL TUBING
ASTM A-544 SPEC. FOR CARBON STEEL WIRE, SCRAPLESS NUT QUALITY
ASTM A-575 MERCHANT QUALITY, M-GRADES, CARBON STEEL BARS
ASTM A-576 HOT-WROUGHT, SPECIAL QUALITY CARBON STEEL BARS
ASTM A-635 SHEET & STRIP, HEAVY-THICKNESS COILS, HOT-ROLLED
ASTM A-659 SPEC. HOT-ROLLED SHEET & STRIP, COMMERCIAL QUALITY (CARBON:0.16-0.25 MAX %)
ASTM A-711 STANDARD SPEC. FOR STEEL FORGING STOCK
ASTM A-787 ELECTRIC-RESISTANT-WELDED METALLIC-COATED CARBON STEEL MECHANICAL TUBING
ASTM A-794 COLD-ROLLED SHEET, COMMERCIAL QUALITY (CARBON: 0.16-0.25% MAX)
ASTM A-827 CARBON STEEL PLATES FOR FORGINGS & SIMILAR APPLICATIONS
ASTM A-830 CHEMICAL COMPOSITION REQUIREMENTS FOR STRUCTURAL QUALITY PLATES
MIL-S-11310E (CS1020) STEEL BARS, CARBON, HOT-ROLLED, FOR SHAPING INCLUDING COLD EXTRUSION
MIL-S-16788A STEEL, CARBON, HOT-ROLLED OR FORGED (BLOOMS, BILLETS, & SLABS FOR REFORGING)
MIL-S-7952A (CS1020) STEEL, SHEET & STRIP, UNCOATED, CARBON (1020 & 1025) (AIRCRAFT QUALITY)
MIL-T-3520C TUBING STEEL (LOW-CARBON) MECHANICAL ROUND
QQ-S-630A STEEL BAR, CARBON, HOT ROLLED (MERCHANT QUALITY)
QQ-S-631 STEEL BARS, CARBON, HOT-ROLLED (SPECAIL QUALITY)
QQ-S-633A STEEL BARS, CARBON, COLD-FINISHED & HOT ROLLED (GENERAL PURPOSE)
QQ-S-634 STEEL BAR, CARBON, COLD-FINISHED (STANDARD QUALITY)
QQ-S-00640 STEEL, CARBON, SHEET AND STRIP
QQ-S-698 STEEL, SHEET & STRIP, LOW CARBON
QQ-W-461H WIRE, STEEL, CARBON (ROUND, BARE, & COATED)
SAE J1397 ESTIMATED MECHANICAL PROPERTIES & MACHINABILITY OF STEEL BARS
SAE J403 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE J412 GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS
Angles
Bar
Channels
Forge
Plate
Rectangle Tubes
Rolled Rings
Sheet
Square Bar
Tees
Tubes
Wire
Zees