JIANGSU TIANCHENG GROUP LIMITED
Yaoguan Town, Changzhou City, Jiangsu Province,China
+86-519-88387662
+86-519-85121683
steel_tube
steeltube.china
Tiancheng_Group
josen_dong
info@tiancheng.org
1040 C .37/.44 Mn .60/.90 P .04 max S .05 max
1045 C .43/.50 Mn .60/.90 P. 04 max S.05 max
1050 C .47/.55 Mn .60/.90 P .04 max S .05 max
1060 C .55/.66 Mc .60/.90 P .04 max S .05 max
the higher carbon contest verses 1018 allows for higher strength properties
| SAE 1045 | ||||
| Chemical composition: C=0.45%, Mn=0.75%, P=0.04% max, S=0.05% max | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.872 *10³ | kg/m³ | 491.4 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 201 | GPa | 29100 | ksi |
| Thermal expansion (20 ºC) | 11.7*10-6 | ºCˉ¹ | 6.5*10-6 | in/(in* ºF) |
| Specific heat capacity | 486 | J/(kg*K) | 0.116 | BTU/(lb*ºF) |
| Thermal conductivity | 50.9 | W/(m*K) | 353 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 1.62*10-7 | Ohm*m | 1.62*10-5 | Ohm*cm |
| Tensile strength (hot rolled) | 565 | MPa | 81900 | psi |
| Yield strength (hot rolled) | 310 | MPa | 45000 | psi |
| Elongation (hot rolled) | 16 | % | 16 | % |
| Hardness (hot rolled) | 84 | RB | 84 | RB |
| Tensile strength (cold drawn) | 625 | MPa | 90600 | psi |
| Yield strength (cold drawn) | 530 | MPa | 76900 | psi |
| Elongation (cold drawn) | 12 | % | 12 | % |
| Hardness (cold drawn) | 88 | RB | 88 | RB |
shafts, machinery parts, bolts, pinions, gears, etc
UNS# G10400 1040, C1040 CARBON STEEL
UNS# G10450 1045, C1045 CARBON STEEL
UNS# G10500 1050, C1050 CARBON STEEL
UNS# G10600 1060 C1060 CARBON STEEL
AMS 5085E (1050) STEEL, SHEET, STRIP & PLATE
AMS 7240E (1060) WASHERS, SPRING LOCK, CARBON STEEL
ASTM A-108 STANDARD QUALITY , COLD FINISHED , CARBON STEEL BARS
ASTM A-183 (CLOSEST CHEM. MATCH) CARBON STEEL TRACK BOLTS & NUTS
ASTM A-236 CARBON STEEL FORGINGS FOR RAILWAY USE
ASTM A-266 (CLOSEST CHEM. MATCH) FORGINGS FOR PRESSURE VESSEL COMPONENTS
ASTM A-29 GENERAL REQUIREMENTS FOR CARBON & ALLOY BARS, WROUGHT & COLD-FINISHED
ASTM A-311 CARBON STEEL BARS, STRESS-RELIEVED COLD-DRAWN, SUBJECT TO MECHANICAL PROPERTY REQUIREMENTS
ASTM A-510 GENERAL REQUIREMENTS FOR WIRE RODS & COURSE ROUND WIRE, CARBON STEEL
ASTM A-513 ELECTRIC-RESISTANT-WELDED CARBON & ALLOY TUBING
ASTM A-519 SEAMLESS CARBON & ALLOY MECHANICAL TUBING
ASTM A-546 SPEC. FOR MED-HIGH CARBON STEEL WIRE, COLD-HEADING QUALITY, FOR HEX HEAD BOLTS
ASTM A-576 HOT-WROUGHT, SPECIAL QUALITY CARBON STEEL BARS
ASTM A-682 STRIP, HIGH-CARBON, COLD-ROLLED, SPRING QUALITY, GENERAL REQUIREMENTS
ASTM A-711 STANDARD SPEC. FOR STEEL FORGING STOCK
ASTM A-713 WIRE, HIGH-CARBON SPRING, FOR HEAT TREATED COMPONENTS
ASTM A-827 CARBON STEEL PLATES FOR FORGINGS & SIMILAR APPLICATIONS
ASTM A-830 CHEMICAL COMPOSITION REQUIREMENTS FOR STRUCTURAL QUALITY PLATES
FF-W-84, CLASS A , (1060) WASHERS, LOCK (SPRING)
MIL-C-10387J COUPLINGS, CLAMP, PIPE: WITH BOLTS & SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE
MIL-S-10520D STEEL, FORGINGS, FOR PROJECTILE STOCK (CLOSEST CHEMICAL MATCH)
MIL-S-11310E STEEL BARS, CARBON, HOT-ROLLED, FOR SHAPING INCLUDING COLD EXTRUSION
MIL-S-16788A STEEL, CARBON, HOT-ROLLED OR FORGED (BLOOMS, BILLETS, & SLABS FOR REFORGING)
MIL-S-46070 STEEL BAR FOR PROJECTILE STOCK
QQ-S-00640 STEEL, CARBON, SHEET AND STRIP
QQ-S-631 STEEL BARS, CARBON, HOT-ROLLED (SPECIAL QUALITY)
QQ-S-633A STEEL BARS, CARBON, COLD-FINISHED & HOT ROLLED (GENERAL PURPOSE)
QQ-S-634 STEEL BAR, CARBON, COLD-FINISHED (STANDARD QUALITY)
QQ-S-700D STEEL SHEET & STRIP, MEDIUM & HIGH CARBON
SAE J1397 ESTIMATED MECHANICAL PROPERTIES & MACHINABILITY OF STEEL BARS
SAE J403 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE J412 GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS
Bar
Forge
Hex Bar
Plate
Rectangle Bar
Rolled Rings
Sheet
Square Bar
Tubes