Contact us

JIANGSU TIANCHENG GROUP LIMITED

Yaoguan Town, Changzhou City, Jiangsu Province,China

+86-519-88387662

+86-519-85121683

steel_tube

steeltube.china

Tiancheng_Group

josen_dong

info@tiancheng.org

EN 10025-EUROPEAN STANDARDS FOR STRUCTURAL STEEL

Publisher:TianchengTime:2018-07-01Number:111


EN10025(1-6) Brief Introduction:


EN 10025 includes a series of European standards for structural steel products, delivery condition is specified as hot rolled. For example, hot rolled steel coils, hot rolled steel section. EN 10025 standard (6 parts) covers a wide range of structural steel product.

EN 10025-1:2004 General technical delivery conditions.

EN 10025-2:2004 Technical delivery conditions for non-alloy structural steel products.
EN 10025 2 2004 symbol

  • S Structural steel.

  • E Engineering steel.

  • 235 Minimum yield strength (Reh) in MPa at 16mm

  • JR Longitudinal Charpy V-notch impacts 27 J at + 20°C

  • J0 Longitudinal Charpy V-notch impacts 27 J at 0°C

  • J2 Longitudinal Charpy V-notch impacts 27 J at - 20°C

  • K2 Longitudinal Charpy V-notch impacts 40 J at - 20°C

  • +AR Supply in as rolled conditions

  • +N Supply in normalized/normalized rolled conditions

Customer options.
  • C Grade suitable for cold forming

  • Z Grade with improved properties perpendicular to the surface.

For example: S275JR+AR, S355J2C+N

 

EN 10025-3:2004 Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steel products.

 

EN 10025 3 2004 symbol
  • S Structural steel.

  • 275 Minimum yield strength (Reh) in MPa at 16mm

  • N Longitudinal Charpy V-notch impacts temp. not lower than -20°C

  • NL Longitudinal Charpy V-notch impacts temp. not lower than -50°C

Customer options.
  • Z Grade with improved properties perpendicular to the surface.

For example S275N, S275NL

EN 10025-4:2004 Technical delivery conditions for thermo mechanical rolled weldable fine grain structural steel products.

EN 10025 4 2004 symbol
  • S Structural steel.

  • 275 Minimum yield strength (Reh) in MPa reference to 16mm

  • M Longitudinal Charpy V-notch impacts temp. not lower than -20°C

  • ML Longitudinal Charpy V-notch impacts temp. not lower than -50°C

Customer options.
  • Z Grade with improved properties perpendicular to the surface.

For example S355M, S355ML

EN 10025-5:2004 Technical delivery conditions for structural steel products with improved atmospheric corrosion resistance.

EN 10025 5 2004 symbol
  • S Structural steel.

  • 355 Minimum yield strength (Reh) in MPa at to 16mm

  • J0 Longitudinal Charpy V-notch impacts 27 J at 0°C

  • J2 Longitudinal Charpy V-notch impacts 27 J at - 20°C

  • K2 Longitudinal Charpy V-notch impacts 40 J at - 20°C

  • W Improved atmospheric corrosion resistance

  • P Greater phosphorus content (grade 355 only)

  • +AR Supply in as rolled conditions

  • +N Supply in normalized/normalized rolled condition

Customer options.
  • Z Grade with improved properties perpendicular to the surface.

For example S235J0W+AR, S355J2W+N

EN 10025-6:2004 Technical delivery conditions for steel plate and sheet of high yield strength structural steel products in the quenched and tempered condition.

EN 10025 6 2004 symbol
  • S Structural steel.

  • 460 Minimum yield strength (Reh) in MPa at 16mm

  • Q Longitudinal Charpy V-notch impacts temp. not lower than -20°C

  • QL Longitudinal Charpy V-notch impacts temp. not lower than -40°C

  • QL1 Longitudinal Charpy V-notch impacts temp. not lower than -60°C

Customer options.
  • Z Grade with improved properties perpendicular to the surface.

For example S460Q, S690QL


History of EN 10025(1-6):
Written by European Committee for Iron and Steel Standardisation, which is a department working on European Standards for structural steel product.
First version of EN 10025 was released in UK by BSI (British Standards Institute)- EN 10025 : 1990, European Standards (ENs) for structural steel products. The first version of this standard is named EN 10025-1990, it replaced part of of BS4360:1986; the second version of EN 10025 was released in 1993, EN 10113 : parts 1, 2 & 3 and EN 10155 was made together. In the summer of 1994, EN10210: part 1 was released and BS 4360 was invalid officially. In 2008 EN 10025 standards replaced SANS 1431 as the newest EN version


Please Login first And Comment,You are not a member Register for Account